翊翔機車行 - Datong District

4.4/5 基於 8 評論

Contact 翊翔機車行

地址 :

103, Taiwan, Taipei City, Datong District, Jinxi St, 67號翊翔機車行

電話 : 📞 +88
分類:
城市 : Jinxi St

103, Taiwan, Taipei City, Datong District, Jinxi St, 67號翊翔機車行
王立泓 on Google

老闆超專業,不只換襯套時間快,還提醒我一些其他的注意點,讚
The boss is super professional, not only the time to change the bushing is fast, but also reminds me some other points of attention, praise
吳尚易 on Google

老闆技術很好!價錢公道!
The boss is very technical! fair price!
s
story from on Google

技師服務很親切,老闆也很誠實不會坑殺外行人,不會硬要客人換零件或是高檔機油,賺得是辛苦錢,值得推薦給大同區的朋友們!
The technician service is very kind, and the boss is also very honest and will not cheat laymen, and will not force customers to change parts or high-grade engine oil. They earn hard money and are worth recommending to friends in Datong District!
謝承軒 on Google

老闆技術好,良性溝通,能從溝通中了解顧客需要的是什麼。
The boss has good skills and good communication, and can understand what customers need from communication.
林子涵 on Google

老闆的技術超好 ,價錢又公道 ~ 超推 ???
The boss's skills are super good and the price is fair ~ Super recommended ???
天崎 on Google

以前還是高中生的時候機車發不動,有來過這邊檢查 但是老闆沒有親自看, 反而是讓另外一個刺青的年輕店員處理 當下感覺就是新人,因為很不放心 想要在旁邊站著觀察 結果老闆說地方很小,要我出去等 我就在玻璃外看,最後年輕的店員也沒查出問題 拆的零件到處都是,拆下來的外殼螺絲都隨便亂丟 最後是老闆找到問題的 結果最後修是修好了,但是年輕的店員在 把零件裝回去的時候,漏了一堆螺絲沒裝回去 而且裝座椅時,不顧卡榫有無對準直接硬裝導致卡榫外露,把車子還我的時候有一個大燈變得不會亮。 我跟老闆反應,老闆就跟我說專業術語(後來查完是指大燈燈泡零件的一種英文名稱), 問本來有幾個(我大燈是本來兩個都會亮), 我根本聽不懂只能回答我不知道, 老闆就說:這你都不知道? 老闆就不屑的走人去招呼來領車的客人, 後來刺青的店員就態度很差的來跟我收錢, 我也不敢再多說什麼, 只能乖乖的付錢把大燈有問題的車騎走 後來是去其他機車行才修好,其他機車行老闆還幫我檢查一遍,把螺絲沒被裝回去的地方都弄好 在日後想起來實在是嚥不下這口氣 本來是看老闆評論很好,想說自己客氣一點希望能好好修好機車,但沒想到會是這種下場 看學生好欺負就丟給新人來修 出問題就這樣處理 不知道老闆對待其他客人是什麼態度 讓他們的評論都如此讚美 但是我日後回想起來都會氣 體驗極差 欺負學生不懂機車就隨意處理的老闆 —————— 回覆: 老闆您好 刺青的部分指的是當時的年輕店員 因為有年份了 店員特徵 您不記得或是我真的記錯了都有可能 但是當年發生的事情如上所述 確實帶給我許多困擾
When I was a high school student, the locomotive couldn't start. I have been here for inspection. But the boss didn’t see it in person, Instead, let another young clerk with tattoos handle it I feel like a newcomer right now, because I don’t feel relieved I want to stand and observe The boss said that the place is very small and asked me to go out and wait I just looked out of the glass, and finally the young clerk did not find out the problem The dismantled parts are everywhere, and the dismantled housing screws are just littered. Finally, the boss found the problem In the end, the repair was completed, but the young clerk was in When putting the parts back, a bunch of screws were missed Moreover, when installing the seat, regardless of the alignment of the latches, the latches were directly installed and the latches were exposed. When the car was returned to me, a headlight would not turn on. I reacted to my boss, and the boss told me about technical terms (later after I checked it was an English name for headlight bulb parts), Ask how many originally (my headlights would be on both originally), I don’t understand at all, I can only answer that I don’t know, The boss said: You don’t even know this? The boss disdainfully left to greet the guests who came to lead the car. Later, the tattooed clerk came to collect money from me with a bad attitude. I dare not say anything more, I can only obediently pay to ride away the bike with the problematic headlights Later, I went to another motorcycle shop to fix it. The owner of the other motorcycle shop also checked it for me and fixed the screws where they were not installed. I can't swallow this breath when I think about it later Originally, I saw that the boss commented very well. I wanted to say that I was a little polite and hoped that I could repair the locomotive, but I didn’t expect it to end this way. Seeing that the students are bullied, throw them to the newcomers to repair Deal with problems like this I don’t know the boss’s attitude towards other guests Make their comments so complimented But I will be angry when I think about it in the future, the experience is extremely bad The boss who bullied the students and handled it at will if they didn't understand the locomotive —————— Reply: Hello boss The tattoo part refers to the young clerk at the time Because of the vintage It’s possible that you don’t remember or I remember it wrong But what happened that year is as described above It really caused me a lot of trouble
C
Chen SAM on Google

驗車態度極差! 第一次在這驗車沒過,驗不過從頭到尾沒怪店家,回去自行調整後再來第二次。第二次去老闆輸入車牌後跟我要複驗查核表,還說沒帶不能複驗直接要我離開,但複驗查核表第三點寫很清楚遺失的話可以請店家重新開立。 講了很久才心不甘情不願的重新開立複驗查核表,接著開始刁自己修不能要車行維修並蓋章才有辦法複驗,還叫我去看電腦螢幕的選項要選誰修的,一看不得了!!!明明就有自行維修的選項可以選,過程還不斷一直強調我沒有在刁你,白紙黑字很清楚要有維修人員簽名蓋章,所以我自己修的不能自己簽?一定要車行的人簽? 準備上機複驗時還在講常常有人怠速調低才驗過什麼的,拜託!這環保局也知道所以Co+Co2>8%,沒有達到系統也不會讓你過。 沒有心辦理檢驗的話真的可以收一收了,第一次就是在你這驗的補助金也給你拿了,規則不清楚的話我可以寫信請環保局再幫你們輔導,現在網路資訊很發達,這年代還在騎化油器老車的多少都懂車,不像以前驗不過的就是肥羊任人宰割。
Very bad attitude towards car inspection! I haven't tested the car here for the first time, but I didn't blame the store from start to finish. I went back and adjusted myself and came back for the second time. The second time I went to the boss to input the license plate and asked me to re-examine the checklist, and told me to leave without rechecking. However, if the third point of the recheck checklist is clearly written, you can ask the store to re-open it. After talking about it for a long time, I reissued the re-inspection checklist unwillingly, and then started to make it difficult to repair it by myself, and I had to have the car dealer repaired and stamped to have a way to re-inspect. I also asked me to look at the computer screen options to choose who to repair. Yes, it’s amazing!!! Obviously there is a self-maintenance option to choose from, and the process keeps emphasizing that I am not trying to trick you. It is clear in black and white that there must be a repairer’s signature and stamp, so I can’t sign it myself if I repair it myself? Must be signed by the dealer? When I was preparing for the re-inspection on the computer, I still said that people often have to reduce the idle speed before they have tested something, please! The Environmental Protection Agency also knows that Co+Co2>8% will not let you pass if it does not reach the system. If you don’t have the heart to handle the inspection, you can really collect it. The first time you get the subsidy for the inspection, if the rules are not clear, I can write to the Environmental Protection Agency to help you counsel. Now online information It is very developed. In this era, those who are still riding old carburetor cars know how to car, unlike the past, the fat sheep can be slaughtered.
高有志 on Google

我是老鄰居,或許老闆還認得我,最早以前在旁邊巷弄內的時候專業服務好5星級的 可是這幾年越來越不行了 我認為現在有改車,專心處理改車的客人,街坊客賺的錢少不在乎了 先是這幾年驗車不都會過,都要再花一兩千處理才會過。 可是今年我又驗不過,沒現場修,去朋友介紹的車行,熱車調一調就能驗過,沒有多花錢。驗車就是過就好,能不換就不換,我發現原來之前驗車一直被當肥羊宰。 前陣子裝機車架年輕店員接洽 一開始報700,後來說要加一個架子50元也ok,隔天去修好後要價800我問不是700嗎?年輕店員回答我裝成800元的架子,我也不想為幾十元爭執就給他800了
I'm an old neighbor, maybe the boss still recognizes me. The earliest time when I was in the alley next to me was a 5-star professional service. But it's getting worse over the years I think now that there is a change of car, I focus on dealing with the customers who change the car, and the neighbors don't care how much money they make First of all, in the past few years, the car inspection will not pass, and it will take another thousand or two thousand to pass. But this year, I couldn't test it again. I didn't repair it on site. I went to a car dealer recommended by a friend, and I can test it after a hot car adjustment. It didn't cost much. It's good to pass the car inspection. If you can't change it, you can't change it. I found that the car has been slaughtered as a fat sheep before the inspection. A while ago, the young shop assistant for the installation of the locomotive frame approached At the beginning, I quoted 700, but later said that it was ok to add a shelf for 50 yuan. After I went to repair it the next day, the asking price was 800. I asked if it was 700? The young clerk replied that I pretended to be 800 yuan, and I didn't want to give him 800 for arguing for tens of yuan.

Write some of your reviews for the company 翊翔機車行

您的評論將非常有助於其他客戶查找和評估信息

評分 *
你的意見 *

(Minimum 30 characters)

你的名字 *

Recommend a place for you