鈞鼎模作 - Lane 23

The boss has been in the mold turning industry for more than 30 years. At present, the second generation has been put into production (the boss has not retired), and the production of silicone molds is very detailed. There is a vacuum deaeration machine in the factory. It turns out that the silicone rubber is in the form of a liquid when the hardener is added to the bridge. After the vacuum deaeration process, the bubbles in the mold are reduced a lot. Knowing that if small bubbles exist in the mold, it is a very annoying problem and will cause defects in the molding of the work). With 30 years of experience, the boss is also very picky about the selection of silicone raw materials. After vacuum degassing and selected raw materials, the silicon mold is finally formed very solidly. The finished work must be washed (removed the oil on the surface of the work), the carving tools are trimmed, and the car repaired with soil, then the primer is applied, and finally the color and gold oil are applied according to the needs of the guests (feel Quite time-consuming and labor-intensive), the boss has high requirements for the works commissioned by the guests. Such a craftsmanship is breathtaking, big push! ! !