鼎盛汽車 - Section 1

I am a car driver who has traveled to various maintenance factories. In the Dingsheng maintenance factory, I can feel the care and professionalism of this maintenance factory on the car. The maintenance products used by the boss are all branded and will be Your car’s individualized assessments and suggestions have solved the problems of my car for many years. I just finished the 100,000-kilometer maintenance, as if I have brought a new car back. I can only say that you get what you pay for. If you have quality requirements, you might as well try

I have been repairing here for more than 20 years. I have paint and engine repairs. I feel really good. The boss is willing to let me know many details. I will not be ignorant of the car. The brand will indicate the repair content. The general materials vary greatly. The boss is very demanding and highly recommended.

On the way home, the car shook violently, so I drove to a nearby store to check it out. As expected, the fuel injectors were hung up again (...). Boss Chen said that the current Deding fuel injectors are out of stock and will have to wait until early October. The quotation of the fuel injector is about 24,000. I am a little skeptical to hear the price at the moment. After all, I only changed XD a few months ago. I immediately called to the original factory. The original factory informed that it is currently available and the single price is about 18500 after a discount, but... it was an exchange item (original new product) suddenly realized, no wonder the price difference is so big, nothing else So I decided to repair it on Boss Chen’s side, and listen to Boss Chen’s philosophy of car repairing by the way.

It’s the first time to do maintenance. After understanding the condition of the car, Boss Chen will analyze and explain in detail what should be replaced and the consequences of not replacing. A very enthusiastic boss strongly recommends to friends in Neihu who want to cooperate with the maintenance factory for a long time?

It's just a routine oil change, and the boss sells other maintenance, which gives people a strong sense of oppression, and should not go to the store again~

Let's start with the conclusion: 1. Dingsheng is a high-quality good store, regardless of materials, prices and technology. 2. For those who do n’t understand the car, do n’t be afraid to be slaughtered. Boss Chen is very popular, he said straightforwardly, “Relax! I will make your money” ~ But in fact he will consider the budget for you You suggest, there are even half-buy, half-feedback feedback, I think I have made a profit instead! 3. In addition to his strict attitude towards construction, Boss Chen has high requirements on quality, because I will come to the car factory to see the progress when I have time, and sometimes I will ask the technician to re-bake when the results of sheet baking are not satisfactory. 4. The senior technicians are also very good. The old technicians know my budget problem and help to think about solutions, but the sheet baking technology has nothing to say. In addition to washing the plates, spray coating according to standard methods, adjust The knowledge of lacquer is great, because I am pearl white, he tried to keep me from having color difference, and the angle of the sheet metal was very delicate, because my layman could not see it. 5. Lacquer is German high-grade lacquer, because I have been to a certain network for three hours and said that the car was not satisfied with the original paint. The former is baked for three hours. I started to fall off in about six months. The reason is that I did n’t apply the primer. After I went to the gas station to wash the car, it did n’t start to break the paint. The latter was because I knew it. It is indeed cheap, but in fact, the cheap end is to have to come again (because the cheap make up and paint made in Taiwan, the original leaves, the rusted parts of the rear trunk have to be redone, because the surface can not be seen But in fact, it began to rust again. In addition, because of my knowledge, I accidentally injured other sheet metal parts during the repair, and I did not make it up, so I had to apply a paint pen and apply it myself) 6. In the end, I feel most embarrassed. The technician helped wash the car after sheet baking. Recently, because the thief broke the glass and changed the glass, the technician also helped to wash the car. These are all extra services. 7. I don't live in Neihu, but I am willing to hand over the car to Dingsheng. I hope that everyone can also recommend Dingsheng, just try it and know! --------------------------- I am an office worker driving an old car (Nissan Sentra M1). Just because I have feelings for this car (feelings are priceless), even if someone else thinks that I want to change to a new car, I still keep it firmly. During the busy life and work at the end of last year, I unfortunately scratched the right half (front door, back door, back leaf, rear guard lever). After working for a while, I started looking for a car factory to prepare for sheet baking. I tried to bake it on the Internet in three hours, and I also bake it to a car factory that my relatives knew (the original car maintenance factory). To be honest, I wanted to go back to the one that my relatives knew to deal with. The reason is to know and Cheap, but then I searched the Internet for a while and decided to come to the heyday, because I thought of working in Neihu, it would be more convenient if I had to pass after work. When I drove to the heyday in the early morning, I did n’t know where to find the courage, so I left the car and the keys. The old technician first came to see the situation and felt that my budget was limited. The old technician was very good and agreed to a quote first. Boss Chen called me in the afternoon and called me very killingly. Since the old technician said what he said, they would absorb it, but after he saw the condition of the car, he asked me to go there and explain it to me. situation. So after passing by, because the hood had an old injury, and then the last trunk was grilled but the rust occurred again last time. The right front leaf also had the same problem, so the result of the discussion was the hood + right front leaf + right front door + Right rear door + trunk sink + right rear leaf + right rear guard bar. The boss called me every Monday and said that I removed it when I looked at the front pole, but I could n’t put it back if there was a problem (I thought it might have broken it because of the previous sheet baking, because the work difference was very large, and the entire angle was not right at the time) Therefore, boss Chen said he should send it to me, and the former Baogan helped me to bake it together. At present, I feel that the boss is not like a businessman. He is the big brother who makes friends! As for the sauce, I started to take a bus to work every day. The professional of the old technician didn't say anything. According to the standard practice, slowly wash the car with vegetable cloth, apply primer, and save my money to apply the rust removal paint. In addition, the parts of the sheet metal parts are also removed from the original paint. The old technician Very confident that it will be handled well! In case there is a problem, go back to the car factory to find him. In this way, from 12/12 to 23, the car slowly grilled and treated the rust. At the same time, the old technician found that the trim of the left back door was broken. The previous car factory just helped me with white glue. Honestly, it did n’t take much to drive back from Keelung to Taipei. Right after it fell off, I bought 3M adhesive myself and it was useless. The old technician found a way to help me connect it. Boss Chen helped me find a sticker to put up the small pieces to increase the appearance. In fact, they are all done by car manufacturers, including car washing. Dingsheng really is not like the previous car factory. It is either to make money for you or to respond to problems. It is also a matter of hearing and then the purse is gone ... Recently, because the thief broke the triangular window (in his own private parking lot), he went back to change the glass. Fortunately, the old car is not expensive, the boss urgently adjusted the goods and handled it in one day (help me clear the broken glass in the car and change it) Good glass). The boss said, "Your car is so dirty." When he got to work after work, the boss said that the young technician helped me wash the car again! The above is here first, and if you think about it later, update it ~ Everyone is welcome to try it, it's really good! (The car factories I have experienced are the relatives recommended by Keelung, the car potential network is in a certain Daan District, and the heyday is also on the vehicle potential network, so whether or not the vehicle potential network friends are recommended to try it ~)

It took 4 years to come back to leave a comment, I am really Aoke ^_^. 2016/9 I came here to help my Yinma III paint the injured sheet parts. Recalling the response and explanation of the boss at the time, I trusted him very much. The boss was very easy-going and willing to communicate with customers. I was not in a hurry. I hope to give priority to quality. The entire paint process took about 5 days. During the period, I took time to see it twice. I feel that the painter is very serious and professional. Although the price of the paint is not the lowest price I visited at the time, the price is very reasonable. Compared with the quality, it is really CP quality. Even after 4 years, the paint is still intact. However, the driving and parking environment in Taipei is not good. My old car still has small scars one after another. If possible, I will still paint here next year. By the way, compared with my previous head, apart from the high fuel consumption, the assembly and handling quality of the car is really excellent!