富祐車業行 - Pingtung City
5/5
★
基於 6 評論
Contact 富祐車業行
地址 : | 900, Taiwan, Pingtung County, Pingtung City, Jianfeng Rd, 198號富祐車業行 |
電話 : | 📞 +8887 |
分類: |
店鋪
,
|
城市 : | Jianfeng Rd |
婷
|
婷 on Google
★ ★ ★ ★ ★ |
l
|
li Qoo on Google
★ ★ ★ ★ ★ |
境
|
境師情 on Google
★ ★ ★ ★ ★ |
洪
|
洪強 on Google
★ ★ ★ ★ ★ |
林
|
林義軒 on Google
★ ★ ★ ★ ★ 老闆人很親切,有問必答,維修保養很專業,現在又有租車服務,很方便喔!
The boss is very kind, answering all questions, the maintenance is very professional, and now there is a car rental service, which is very convenient!
|
晚
|
晚出早歸 on Google
★ ★ ★ ★ ★ 2022年03月21日週一,引頸期盼輪休,購入好一段時日彩鈦後避震終於有時間安裝,之前改裝都DIY,後避震自己噴螢光粉紅,上座掉漆一大片不能看,自己拆裝很費工,拆馬桶、踏板,連前檔板都得拆,決定請專業師傅施工,咕狗離家近「永添國際二輪實業無限惡搞手作工坊」,上午10點多去,沒開。再去建豐路,啊!忘了店名也忘了帶手機,印象有「富」(建富),在OK附近,到了建豐路看到「富祐」就進去了。師傅外出拿零件,師娘親切熱情招呼,外頭飄雨我坐裡面賓客區等。5’師傅返店,我說明來意,師傅說可以試著安裝看看,我請師傅先幫另一位比我晚到的少年仔換機油,再搞我的車。我跟師傅說woo115後避震不好拆,師傅也認同,原以為會跟我一樣拆馬桶、踏板、前檔板,結果升高機一升,直接手伸進去拆上座(蛤!這麼容易)。原廠孔距30,彩鈦孔距32,我有準備後移座,上座鎖上後,鎖點沒差很多,鎖上後移座,會搖動,塞墊片還是搖,安全起見我問師傅可否不裝後移座?可。原廠螺絲鎖進去只露一點出來,彩鈦附的大頭6角螺絲半牙,師傅為了安全起見,拿店裡全牙大頭鎖上,安裝竣工後,師傅平地按壓後座穩不穩固,確保安全,並說明阿6仔貨「鋼水」不佳,太軟,調了也一樣。工資400,OK的。我稱讚師傅好功夫,師傅淡淡回答:「時間、經驗累積出來。」回家查評價,富祐完美5星,覺得自己真的很幸運,這一切都是最好的安排、緣份,謝謝師傅。我隨手把賓客區座椅推回原位,像我這樣的人客極罕見喲!
On Monday, March 21, 2022, I was looking forward to taking a vacation. After buying the color titanium for a long time, I finally had time to install the rear shock absorber. The previous modification was DIY, and the rear shock absorber sprayed fluorescent pink by itself. , It is very laborious to disassemble and assemble by yourself. I have to disassemble the toilet, pedals, and even the front baffle. I decided to hire a professional master to build it. Gougou is close to home. , not open. Go to Jianfeng Road again, ah! I forgot the name of the store and I forgot to bring my mobile phone. The impression is "Fu" (Jian Fu). Near OK, when I saw "Fu You" on Jianfeng Road, I went in. When the master went out to get the parts, the mistress greeted me warmly and warmly. It was raining outside and I sat in the guest area and waited. 5’ When the master returned to the store, I explained the purpose of the visit. The master said that I could try to install it and see. I asked the master to change the oil for another young man who arrived later than me, and then took care of my car. I told the master that the rear shock absorber of woo115 is not easy to remove, and the master agreed. I thought that I would remove the toilet, pedals, and front baffle like me. As a result, I raised the machine by one liter and put my hand in it to remove the upper seat (Clam! It's so easy) . The original hole distance is 30, and the color titanium hole distance is 32. I have prepared the rear seat. After the upper seat is locked, the locking point is not much different. When the rear seat is locked, it will shake. The gasket will still be shaken. I ask for safety. Can the master not install the rear seat? Can. The original screw is locked in and only a little is exposed. The big head 6 angle screw attached to the color titanium is half tooth. For the sake of safety, the master locks it with the big head of the whole tooth in the store. It is safe, and it explains that the "Steel Water" of A6 Aberdeen is not good, it is too soft, and it is the same if it is adjusted. Salary 400, OK. I praised the master for his good work, and the master replied lightly: "Time and experience are accumulated." When I went home and checked the evaluation, Fuyou had a perfect 5 stars, and I felt really lucky. All this is the best arrangement and fate. Thank you, master . I just pushed the guest area seats back into place, which is extremely rare for a guest like me!
|
Write some of your reviews for the company 富祐車業行
您的評論將非常有助於其他客戶查找和評估信息
Recommend a place for you